Hose Clamps
American type stainless steel hose clamps of band consist with perforated band. Stainless steel hose clamps help secure many types of hoses, including pneumatic and exhaust hoses and resist rust and corrosion and are useful in humid or damp conditions.
The width of American type hose clamp is from 9mm to 12.7mm.
The band of German Type Hose Clamp has wolf teeth designed for reduce clamping chafing and damage. Stainless steel hose clamps help secure many types of hoses, including pneumatic and exhaust hoses and resist rust and corrosion and are useful in humid or damp conditions. The width of German type hose clamp is 12mm.
TOOLS REQUIRED FOR INSTALLATION
1. Flat-head screwdriver or 6/7/8-mm nut driver | 2. Vernier caliper |
OPERATING INSTRUCTIONS
THE NECESSITY OF HOSE CLAMP
SPECIFICATION
American Type Hose Clamps
German Type Hose Clamps
MAINTENANCE
These products will be free from defects in material and manufacture at the time of purchase. Shelf life on stainless steel strap are 5 years from the date of production when stored in original packaging and humidity controlled storage (10°C/50°F to 27°C/80°F and <75% relative humidity).
CAUTION
- Confirm that steel strap and housing are in good condition before use.
WARNING
- Please keep out of reach of children.
- Confirm that steel strap and buckle are in good condition before use.
- Once cutted, the strap of cutting edge may be sharp.
- Once tightened, steel strap may be difficult to loosen.
- Always wear approved eye protection and protective gloves.
- Not Insulated. Steel strap is not insulated for protected against electrical shock.
- Catalogue
-