What are Cable Tie holders & Mountings? Industries and Applications

Cable tie holders can be used in a variety of different industries, from HAVC, electronic circuits, building, solar work to automotive and different industries with applications such as HVAC components, panel, white goods, junction boxes, rack enclosure cabinets and electric cable enclosures. Many data cabinet back panels have pre-drilled or pre-punched holes for accepting screw fastened cable tie mounts and other accessories. Therefore, it is important to use the right mountings in different places. One indicator of the successful point of a large and professionally assembled project is the cables and conductors to be discreetly installed by professional design.

Why Use Cable Tie Holders & Mountings are Indispensable and Important?

Cable ties are often used to neatly and cleanly bundle wiring which keep high voltages and low voltages separate, Identify and isolate voltage conductors from datacom and signal wiring and enable easier circuit tracing in an outdoor cable enclosure.

To help the above goals better achieve, the use of right cable tie holders and mounts can help the cable ties be installed more easier, neatly, beautiful, safe and stable..

Moreover, the use of the holders and mountings can prevent the cable from tangling, and being damaged due to the knotting and long-term friction, such as for an outdoor telecom equipment cabinet, the use of the holders and mountings keep the wires from being snagged or damaged by activities in the location. Since the cables and wires are well organized, the installation, maintenance and repair can save time and resources.

Types of Tie Holders & Mountings

• Saddle Tie Mounts
• Self-Adhesive Cable Tie Mounts
• Push-In Cable Tie Mounts
• Fir-Tree Cable Tie Mounts
• Twist Lock Cable Clip
• Masonry Cable Tie Mounts
• Push Rivet Applied Mounts / Knock-in Low Profile Mounts
• Screw Applied Low Profile Mounts

	Saddle tie mounts as the name implies, it refers to the shape of the mount, like a saddle with a curved arc, this curved design can provide additional support for cables and wires. They also known as cable tie cradles. There is a hole in the middle of the bottom of this type of mounts, which can be fixed with screws in the position you want. In a rough type, they can be divided into low-base and high-base types. Lower base for clean, smooth, grease free surface while higher base to avoid obstacles on chassis. Because this type of mount is more stable with screw, it is designed to hold heavier cable ties. In order to response to the needs of different industries, Hua Wei provides not only PA66 cable tie mounts that can be used in applications ranging from agriculture to trucking, PA66MD cable tie mounts which adopt metal detectable material for food and beverage solutions, but also PA12 cable tie mounts with long-lasting UV resistance for solar work.
	Self-Adhesive Cable Tie Mounts are a type of mount with an adhesive sticker on the back for lightweight wire or cable bundles. The most common mounting surfaces are smooth steel or plastics. It can be installed on smooth surfaces such as walls, plastic, wood, concrete walls and metal. The four edges of the mount are slotted to accommodate cable ties from two angles. Moreover, these Self-Adhesive Cable Tie Mounts offered by Hua Wei are designed with a hole in the middle of the bottom to enhance stability. Drilling screws is also an option when stability needs to be enhanced.
	Push-In Cable Tie Mounts Push mount fixed function is designed for an application requires one step fastening and installation by knocking into hole. Because of its extended head, the bundles can be located at a distance from the panel. This arrow head is utilized to form a secure anchor point for cable tie on a panel or chassis. Many are designed to be removable as well since they just press into place.
	Fir-Tree Cable Tie Mounts gets its name from the resemblance to an upside-down tree. To use this mounted cable ties that push into a panel hole, either pre-drilled or drilled at the time of installation. It's easily installed, but difficult to remove or pull free. You'll often see this type of cable tie mount in the automotive industry. With multiple ribs, it installs securely in mounting holes of various depths. The fir-tree mounted locking cable clamp is easy to install on various thicknesses of panel boards.
	Twist Lock Cable Clips are designed to support light weigh wire bundles when properly applied on any clean, smooth, grease free surface. No need for extra tools, these mounts are ideal for applications with limited space.
	Masonry Cable Tie Mounts are designed for mounting in hard materials such as block, brick or concrete walls, also can be used in soft materials including wood, chipboard, plasterboard etc... It's suitable for both standard and heavy zip ties.
	Push Rivet Applied Mounts / Knock-in Low Profile Mounts with special “diagonal” design of the fixing guarantees a secure installation at all times. Particularly designed for the areas with restricted access. This type of mount eliminates screws and secure wires to any pre-drilled panel.
	Screw Applied Low Profile Mounts. These is a slight difference between Screw Applied Low Profile Mounts and Push Rivet Applied Mounts. The former install with a screw or rivet for a strong, secure installation, particularly used in telecoms equipment, switch gear and control cabinets where with minimal space while the latter eliminates screws.

Hua Wei Gives your Easy and Tidy Cable Management Solutions!

Download Free for Cable Tie Holders & Mountings Catalog

Need quotation? Questions? Please contact us.

Find More Cable Tie Fasteners Hua Wei Have.